Вопросы и ответы онлайн на любые темы
0 интересует 0 не интересует
Показы 43

History and Manufacturing of Glass

The word glass comes from the Teutonic term “Glaza”, which means amber. Although the origin of glass production line is still uncertain, the Mesopotamians from the 5th century BC discovered an ash by chance when they fire to melt clay vessel to use for glazing ceramics or when copper was smelted. In Egypt, greenish glass beads were excavated in some of the Pharaohs’’ burial chambers dating from the early 4th century BC, and this has been referred to as intentional glass manufacture. From the second century BC, the production of rings and small figures by using core-wound techniques began to appear. The oldest blueprint for glass was made on clay tablets in 669-627 BC, which read: “Take 60 parts sand, 180 parts ash from marine plants, and 5 parts chalk”. This blueprint is now held in the great library of the Assyrian king, Ashurbanipal, in Nineveh. [1]

The invention of the Syrian blowing iron around 200 BC by Syrian craftsmen enabled the production of thin-walled hollow vessels in a wide variety of shapes. Excavations have revealed that in the Roman era glass was used for the first time as part of the building envelope of public baths in Herculaneum and Pompeii. These panes could have been installed in a bronze or wood surround or without a frame. In the middle ages, this technique spread to the northern Alpine regions, and utensils like drinking horns, claw beakers, and mastos vessels started to be produced; in addition, the use of glass increased in the building of churches and monasteries. [2]

Blown cylinder sheet glass and crown glass were invented in the 1st century AD and the 4th century AD respectively. In both, a blob of molten glass was drawn off with a blowing iron, performed into a round shape, and then blown into a balloon. Blown cylinder sheet glass and crown glass remained two of the most important production techniques for producing glass furnace until the early 20th century. From the 17th century, glass usage was not only limited to churches and monasteries but it also started to be used for glazing palaces. High demand motivated glass-makers to develop new methods, and in 1687 the process of casting glass was invented by the Frenchman Bernard Perrot, in which the glass melt was poured onto a smooth preheated copper table and pressed onto a pane with a water-cooled metal roller. In this way, a glass pane of up to 1.20 x 2 m could be produced. Although this method made it possible to produce glass at a cheaper price, the use of glass windows was still expensive.

Considerable improvement was made after industrialisation in the 19th century. In 1839, the Chance brothers succeeded in adapting the gridding, cutting and polishing of blown cylinder glass in order to reduce breakages and improve the surface finish. In the 1850’s, it became possible to produce a massive amount of glass panes required for the construction of a crystal palace. Machine-made glass panes were not produced until 1905, when Emile Fourcault succeeded in drawing these directly out of glass melt. In 1919, Max Bicheroux made a vital discovery in the production of glass by concentrating several stages of the procedure into a continuous rolling mill; the glass melt left the crucible in portions and passed through two cooled roller to form a glass ribbon. In this way, a glass pane with the dimensions of 3 x 6m could be produced. In the 1950s, the Englishman Alastair Pilkington developed the hot end glass equipment, wherein viscous glass melt was passed over a bath of molten tin floating on the surface. Tin was used because of the high temperature range of its liquid physical state (232 to 2270°C) and having a much higher density then glass.

 

Floating is currently the most popular process, representing over 90% of all flat glass production worldwide. Float glass is made in large manufacturing plants which operate 24 hours a day, 365 days a year. In this process, raw materials are melted at 1550°C, and the molten glass is poured continuously at 1000°C onto a shallow pool of tin. The glass float on the tin forms a smooth flat surface of almost equal thickness (depending on the speed of the rollers), which then starts to cool to 600°C; after this, it enters the annealing Lehr oven and slowly cools down to 100°C to prevent any residual stress. The typical size of glass panes are 6 x 3.20 m, and hard coating can be applied during the manufacture. [3]

In this process, the two sides of the glass pane are slightly different. On the tin side, some diffusion of tin atoms onto the glass surface occurs, [5] causing a lower glass strength on this side due to the surface flaws occurring during production. [6] The tin side can be easily detected by ultraviolet radiation.

Another process for the production of flat glass is the cast process. In this process, cold end glass equipment is poured continuously between metal rollers to produce glass with the required thickness. The rollers can be engraved to give the required surface design or texture and produce patterned glass. The glass can be given two smooth surfaces, one smooth and one textured, or two textured sides, depending on the design. In addition, a steel wired mesh can be sandwiched between two separate ribbons of glass to produce wired glass. Wired glass can keep most of glass pieces together after breakage, and it is therefore usually used as fire protection glass.

Вопрос 22 Ноя, 22 автор llkktth179 профи (баллы 1,010) тема Недвижимость | Показы 43

Пожалуйста, войдите или зарегистрируйтесь для публикации ответа на этот вопрос.

Похожие вопросы

0 интересует 0 не интересует
0 ответов
Вопрос 22 Апр, 22 автор bop15mo профи (баллы 1,010) тема Документы отдых | Показы 24
0 интересует 0 не интересует
0 ответов
Вопрос 22 Март, 22 автор fgd48dsf профи (баллы 1,010) тема Футбол | Показы 32
0 интересует 0 не интересует
0 ответов
Вопрос 20 Апр, 22 автор bop13mo профи (баллы 1,010) тема Hi-Tech, Железо | Показы 27
0 интересует 0 не интересует
0 ответов
Вопрос 21 Окт, 22 автор llkktth157 профи (баллы 1,010) тема Браузерные игры | Показы 34
0 интересует 0 не интересует
0 ответов
Вопрос 29 Сен, 22 автор llkktth150 профи (баллы 1,010) тема Массаж, Фитнес | Показы 41
0 интересует 0 не интересует
0 ответов
Вопрос 18 Апр, 22 автор bop11mo профи (баллы 1,010) тема Банки, Кредиты | Показы 42
0 интересует 0 не интересует
0 ответов
Вопрос 21 Ноя, 22 автор 63 профи (баллы 1,010) тема Недвижимость | Показы 31
0 интересует 0 не интересует
0 ответов
Вопрос 15 Ноя, 22 автор llkktth177 профи (баллы 1,010) тема Hi-Tech, Железо | Показы 19
0 интересует 0 не интересует
0 ответов
Вопрос 08 Ноя, 22 автор llkktth174 профи (баллы 1,010) тема Массаж, Фитнес | Показы 21
0 интересует 0 не интересует
0 ответов
Вопрос 03 Ноя, 22 автор llkktth169 профи (баллы 1,010) тема Гуманитарные науки | Показы 24
22,468 вопросов
60,702 ответов
3,054 комментариев
770,579 пользователей